It is adjusted by moving the position of the reel bearing seat on the arm of the lifting frame. When adjusting, remove the C2990V belt first, then remove the fixed bolt on the arm, and then move the reel. When moving, it must be done at the same time from left to right, and pay attention to keep the two holes corresponding to the fixed holes, and then insert the latch. After the adjustment, the tension of the spring on the hanging chain should be readjusted to make the C2990V belt tension properly.

Adjustment:

General growing crops, adjust the reel axis to a distance of 250 to 300 millimeters from the vertical line of the front guard of the blade guard.

Lodging crops should be as far forward as possible when harvesting in the upside down direction, and should be close when harvesting in the reverse lodging direction Blade guard position;

High-stalk high-density crops, forward adjustment; Sparse short crops, as far back as possible to feed the auger.